Redmi Note 11 Pro+ & POCO X4 Pro Flash File & Flashing Guide !!
Flashing a Xiaomi smartphone using the Mi Flash Tool is an advanced operation that should be done with caution. It's important to follow the instructi
 |
| Redmi Note 11 Pro+ & POCO X4 Pro Flash File & Flashing Guide !! |
About POCO X4 & Redmi Note 11 Pro+
The POCO X4 Pro features a 6.67-inch Full HD+ display, a Qualcomm Snapdragon 695 chipset, up to 8GB of RAM, up to 256GB of internal storage, and a 5,000mAh battery with 67W fast charging support. It also features a quad-camera setup on the back, with a 64-megapixel primary camera, an 8-megapixel ultra-wide-angle camera, a 2-megapixel macro camera, and a 2-megapixel depth sensor. On the front, it has a 20-megapixel selfie camera.
The Redmi Note 11 Pro+ features a slightly larger 6.67-inch Full HD+ display, a Qualcomm Snapdragon 695 chipset, up to 8GB of RAM, up to 256GB of internal storage, and a 5,000mAh battery with 67W fast charging support. It also features a quad-camera setup on the back, with a 108-megapixel primary camera, an 8-megapixel ultra-wide-angle camera, a 2-megapixel macro camera, and a 2-megapixel depth sensor. On the front, it has a 16-megapixel selfie camera.
Both devices run on Xiaomi's custom Android-based operating system, MIUI, and offer various connectivity options, including 5G support.
How to flash Xiaomi Smartphone !!
Flashing a Xiaomi smartphone using the Mi Flash Tool is an advanced operation that should be done with caution. It's important to follow the instructions carefully to avoid bricking your device. Here's a step-by-step guide on how to flash your Xiaomi smartphone using the Mi Flash Tool:
: Before starting, make sure you have a backup of all your important data, as flashing the device will erase all data on it.
Download the Mi Flash Tool from the official Xiaomi website.
Download Flash Tool !!
Download
Download the firmware for your Xiaomi smartphone. Make sure you download the correct firmware for your device model and region.
Extract the firmware files to a folder on your computer.
Install the Xiaomi USB drivers on your computer.
Enable USB Debugging on your phone by going to Settings > About phone > Tap on MIUI version 7 times > Go back to Settings > Additional settings > Developer options > USB debugging.
Power off your phone and boot it into fastboot mode by holding down the Volume Down and Power buttons simultaneously.
Connect your phone to your computer using a USB cable.
Launch the Mi Flash Tool on your computer.
In the Mi Flash Tool, click the "Select" button and navigate to the folder where you extracted the firmware files.
Select the firmware file that you want to flash.
Select the flashing option you prefer, such as "Clean All" to wipe all data on your phone or "Save User Data" to keep your data.
Click the "Flash" button to begin the flashing process.
Wait for the flashing process to complete. Do not disconnect your phone from the computer during the process.
Once the process is complete, the Mi Flash Tool will display a "Success" message.
Disconnect your phone from the computer and power it on. The first boot after flashing may take a few minutes, so be patient.
That's it! Your Xiaomi smartphone should now be running the firmware you flashed using the Mi Flash Tool.
Download Flash File !!
Redmi Note 11 Pro+ 5G Flash File
Download :- Download
Download POCO X4 Pro Flash File
